VANGUARD Inorganic Crystals Coating For Plastic

• Wash the car: clean the car thoroughly.
• Remove stains: Use stain remover to get rid of dirt and asphalt and clean the car.
• Remove brake dust: use the brake dust remover to solute some part of carbon or brake dust and wash clean. Then use the clay to thoroughly clean the particle residue and clean the car.
• Polish: Polish the car paint, suggested to use the polishing wax. If there is not stain remover or brake dust remover tools or detergent, it can be polished directly. But should choose the compound to precede polishing work from coarse, medium to fine consistency in order then finished by wash the car.
• Degreasant: Use the degreasant to remove the polish residue and other organic silicon material on paint. If there is no degreasant application, coating can still be applied but it will not be as effective as it should be.
• Coating: Firstly drop 5 drips to the applicator sponge and wipe horizontally then vertical direction to the 40cm*40cm squared area.
• After this step, calculate the cure time and use the clean towel to wipe on surface to check if there is any resistance then polish the paint. Remember this timing then use this timing to apply the coating to the whole car from front to back and top to bottom
• Checking: Do a thorough check the entire car paint to see if there is any solidifying coating residue.
• Waiting: After the coating complete, the car needs to be parked indoor for at least 2-3 hours before hands back to customer. During the waiting time, do not use any water to the car nor touch the surface.

SiO2 Fluro Crystal Coating Solidify Time Instruction：

• SiO2 Fluro Crystal Coating solidify speed, temperature and humidity are relatively corresponded; the higher temperature and humidity, it’s faster to solidify with shorter timing.
• Solidify timing means the time when SiO2 Crystal Coating has applied onto paint surface and when coating cured on the surface. I. The coating can work with infrared light or heated equipment to shorten the coating working time. When wipe the surface with a towel and feel resistance, then it is time to wipe clean the coating.
• Curing timeout will be a great harm to the car. When curing timeout will cause the coating gets too dry and cannot be wipe off with a towel leaving the paint dull. It may even cannot be removed with a polishing machine or can only be removed by water paper sander. Therefore it is best and suggested to work from sections to areas.